Friday, July 22, 2011

FarLinX TCP/IP to XOT Gateway Appliances with 2 free expansion slots

FarLinX TCP/IP to XOT Gateway appliances with 2 free expansion slots
FarSite has introduced specialized versions of their FarLinX X.25 Gateway X.25 to XOT and X.25 to TCP/IP Appliance line that feature no X.25 Lines. While this seems contradictory, there's actually a very good reason why these units are now available in this configuration. In fact, when we first saw these new devices, we emailed FarSite inquiring "Under what circumstances would someone
not want a X.25 line on the FarLinX X.25 Gateway-1 X.25 to XOT and X.
25 to TCP/IP Appliances?" FarSite's answer was as follows:

Good question. The customer who wants it have the following problem. A network running TCP but some application servers somewhere running X.25. These X.25 lines are converted locally to XOT then fed over the IP network (eg by a Cisco network device). Devices that want to use these application servers now have to talk XOT. This is where the FarLinX XOT Gateway comes in as it allows the Devices to use TCP and convert that traffic to XOT so they can talk over the IP network to the XOT supporting application servers.

Frankly we did not anticipate this requirement when we developed the Gateway product but we added the capability in due to customer requests, including some quite large ones.

The TCP/IP to XOT Gateway Appliances are available in four different configurations:

  • F-FL2600NFarLinX TCP/IP to XOT Gateway appliance 2 free expansion slots
  • F-FL2600EFarLinX TCP/IP to XOT Gateway appliance 2 free expansion slots (export restrictions)
  • F-FL2600N-48FarLinX TCP/IP to XOT Gateway appliance 2 free expansion slots (-48 VDC version)
  • F-FL2600E-48 FarLinX TCP/IP to XOT Gateway appliance 2 free expansion slots (-48 VDC version) (export restrictions)

Thursday, July 7, 2011

Mount versatility for the Sonnet Transposer Universal 2.5" SSD or HDD to 3.5" drive tray adapter

Versatile Mounting Solution

Transposer adapts 7mm to 15mm 2.5" SSD drives to any 3.5" drive tray. Standard position mounting holes on the bottom of Transposer enable you to install an SSD drive into a Mac Pro hard drive carrier. Side mount position holes provide proper mounting positions for a a wide variety of drive trays, such as those used in Sonnet Fusion storage systems.

Versatile Mounting Solution

Mac Pro Hard Drive Carrier

With standard position bottom mounting holes, installation of Transposer into a Mac Pro's hard drive carrier is quick and easy.



Fusion Drive Tray

Transposer's side position mouting holes provide the security and convenience of installing 2.5" SSD drives in 3.5" drive trays.